One of the preferred materials for decoration is undoubtedly the marble as it brings both style and distinction in any of the environments where you are. And also has the power to last for generations.
If you have furniture or floors of this material in your house, you may have noticed that absorbs stains easily and should be your constant care. What happens is that marble is a stone extremely porous and delicate (and face) that requires person more careful maintenance and cleaning. But do not worry; here are some tips that will help secure!
For general cleaning of marble
You can use hot soda water, and then rinsed with clean water. Another alternative is also the vinegar or any cleaners containing acetic acid, however, you must not abuse, and that ultimately ruin the material.
How do I clean white marble?
We suggest you prepare a solution with 1 / 2 cup of hydrogen peroxide and the juice of 1 lemon squeezed. When you list, apply to the entire marble surface, using a damp sponge, without removing it. Let stand for a whole day and then wash it with water, then dry with a soft cloth. You will see how clear! Finally, take some clear wax and get even brightness.
How do I clean marble color?
For the marble color, we recommend washing the marble surface first with water and liquid detergent. Then check in a little petrol cloth and wipe the areas most affected. Rinse with water and dry the surface. Finally, to polish, apply wax over the entire surface white colorless, then with a polishing cloth.
How do I take out the stains?
If you find a spot which is difficult to let go, we recommend rubbing it with peroxide and let it act for a couple of hours. Then, rub and rinse with a damp cloth helps.
For darker stains, you can try gasoline or mineral oil. Furniture cleaner’s products (while of good quality) are also desirable.
- Stains left by cigarette burns … can only be removed by polishing the marble again!
- Stains left by wine or coffee … can be removed by wiping with a solution of borax and water (3 or 4 tablespoons in 500 cc of water). Rub and rinse well when you’re done applying.
- The oil or grease stains are very difficult to remove due to the porosity of the material itself. If you’re just dirty, you can do is to prevent dry out and spoil more material using any substance degreaser.
- The marble tables will shine if you put a handful of salt on the surface and start to rub with a wet cloth.
Hope this helps! Put into practice these simple tips and tell us then what was it like.